150Mbps 300Mbps big area wireless wifi repeater indoor wifi access point
Embedded MIPS 24KEc 580MHz with 32KB I cache/16KB D cache.
2T2R 2.4GHz with 300 Mbps PHY data rate.
Legacy 802.11b/g and HT 802.11n modes.
20/40 MHz channel bandwidth.
Hardware NAT with IPv6 and 2 Gbps wired speed.
USB 2.0 host/device dual mode, Support 3G module.
Wireless Access Point
Up to 300Mbps PHY
Up to 16 channel
WAN/LAN : 10/100 Mbps Ethernet switch
USB Battery charging
Up to 4 x USB charge
Up to 3A total
Universal charging to various devices : Support iPhone/iPad, Android phone, other smart mobile phone,and the other portable devices
Telephone line port
Connect telephone line to RJ11 port
Support 3G modul by usb2.0 interface
Support SD/TF card storage up to 64GByte
Support USB mass storage
-20 to+60 °C
-40 to+60 °C
86mm x 86mm x 42mm(L x W x H)
Wall type WIFI router with the country's first telephone interface
The 11N 150M Wireless AP, transfer faster and more stable
Exempt hotel walls trouble playing online module
Wired and wireless integration
The most complete wireless encryption technology, with WEP, WPA-PSK, WPA2-PSK, WPA, WPA2, MAC address authentication, and other encryption / security settings to make wireless networks more secure
Support relay function, let your WIFI broader range of distances.
Applicable to corporate boardrooms, cafes, restaurants and the hotel lobby and lounge area, shopping and leisure area,you can increase at any time as needed.
Ap into the wall is for the hotel room , dormitory, hospital wards and other rooms intensive environments wireless coverage needs and design a wireless panel AP, using the national standard 86mm panel design , support standard PoE power supply DC-DC power supply too , can not destroy the original interior decoration case , install network wiring directly to the 86 type cartridge , and supports unified configuration by the wireless controller , management, rapid formation of high-quality, easy to manage wireless networks.
Remove the cover(Use a screwdriver to remove the cover from the panel surface)
Connecting wire(The 220V wires, cables, telephone lines connected to the specified interface on the rear panel to ensure a firm connection,Connect the power off before connecting wires to connect 220V,Avoid electric shock).
Mounting screws(Remove the screws from the box, put the socket into the bottom box fixed rear panel, the panel surface cover to cover, the surface.In the bottom box to adjust the screws tighten the screw ratio.)
Install the cover(Cover snaps into the slot above the panel).
Shenzhen Caratar Technology Co., Ltd, Is a leading providers of SOHO & SMB networking products, offering both innovative and award winning solutions to the market.
R&D Manufacture that is fully committed to developing its products, services and consumer relations through extensive R&D, strict Quality Assurance practices, and effective outreach initiatives. Customer loyalty through interaction, focus and feedback are policies that help form the Caratar culture, as well as a commitment to achieve, and a dedication to innovate.
Technologybefocused on RF Bluetooth Wi-Fi Zigbee Z-wave Enocean etc. Many years of experience on wireless network product and Embedded Industrial product . offering a complete range of networking solutions consisting of Routers, Adapters, Cameras, Switches, and many other WLAN Wired and Wireless devices for both Home and Office use.
The Main product :
Wireless department : In-wall AP Router WI-FI module Mini pocket wifi router
Industrial department : Air purifier USRP Warm clothing