Anti-static conductive sliver paint For iPhone 5 5c 5s 6 plus LCD refurbish repair Silver Wire Glue Paste for PCB Board Switches

Feedback Ratings
US $1.00 / Piece |1 Piece (Min. Order)
- + Pieces available
0piecesselected, US $in total
View Details
Please confirm the quantity of the goods.
Report Suspicious Activity
Quick Details
Main Raw Material:
conductive sliver paint

Anti-static conductive sliver paint For iPhone 5 5c 5s 6 plus LCD refurbish repair Silver Wire Glue Paste for PCB Board Switches

1, Item: Conductive Anti-static silve paint

2, Function: anti static glue Suitable for iphone 5/5c/5s lcd LCD repair, make it no flash on the lcd screen. 

3, 100% new and high guality


4, Each product was checked before shipment.

0.3ml High conductivity disposable conductive silver glue wire paste for electronic repair ribbon cable repair

One bag of list:  0.3ml conductive silver glue      *     10  pieces

                        Needle mouth                          *     20  pieces


After thawing, the adhesive must be transferred onto dispensing equipment for stand-by, avoiding bringing in air and bubble. Because the process craft vary from environment, to screen printing, gum and dipping glue, it is advised to add adhesive several times and it must use up the adhesive during 8 hours each time. In order to keep the quality, install protective cover to reduce the volatilization of adhesive and cut off the dust particle in the air. If it exceed the advised use time at the room-temperature, it may happen that the silver power and the resin layer, the adhesive will stiffen/dry, and the thrust will decrease after curing.Because of the craft characteristic, if it need be diluted, please use DBE or diethylene glycol butyl ether as diluent.


The data of this material is typical value and/or scope, so it is real and reliable experimental result data; but it doesn't serve as product test report, only for reference. Application Instruction of UT-LED Series Conductive Silver Adhesive.Transfer the product to freezer(-5 degree or 23 degree) immediately. If it is exposed at room-temperature, there will be bubble. And after 24 hours, it can be taken out and then unfreeze it


Our company is specialized in the research and production of various kinds of glue. We can according to customer different's need to configure the product. If customer wants to sell our products, we can provide the most advantage of the price for you, and Provide adhesive your company's labels service, please talk about with me if you have the intention.

Xiamen Luduo Electronic Technology Co., Ltd.

507,Quanshun Group 3#, High-Tech Zone of Huli, Xiamen, China.



Product Description

UT-ET series conductive silver adhesive is is one-component epoxy conductive silver adhesive.Its merits are below: good printability, conductivity, inoxidizability, hardness and strong adhesion; excellent resistance to bending performance and folding performance; low modulus; good solvent resistance; good adhesion to PET, PI, ITO, FR, PVC. And it is applied in electronic circuit printing, such as touch screen circuit, flexible printed circuit and FPC.

This series product is widely applied in the printing of touch screen, keyboard, mobile phone shielding circuit, non-contact IC card antenna, RFID, ITO film, polyester film, conductive zabra paper, membrane switch. And it is suitable for three operation processes——dispensing, dipping ,and screen printing.