car wrap vinyl film
Heat resistant:-50C to 200C
No glue leave after remove
3d carbon fiber car wrap vinyl film with air free bubble
3D carbon fiber film with air drain
-50°C to +200°C
Mask thickness before embossing
Imported removable glue
Gram weight of release paper
140gsm embossing paper
Thickness of release paper
Stand up against
water, dirt, grease, salt, weak acids oil
indoor 7-8 years, outdoor 5-6 years
Black, white, red, green, blue, orange, grey, pink, yellow,glod,sliver
Indoor 7-8 years; outdoor: 5-6 years
1. Cleaning the surface with rubbing alcohol prior to installing the vinyl will help with adhesion
and clean any contaminants that may cause imperfections.
2. Using a heat gun can aid in the installation by making the vinyl more pliable and also help remove
3. Using a soft rubber squeegee will help smooth out bubbles and wrinkles 4, you could buy the best
heat gun and car wrap squeegee in our company
1.No pasting in rainy or cloudy weather.
2.No waxing one week before the pasting of the car sticker.
3.No washing in 48hrs after the pasting.If there is crimp or crease or if the temperature is low,
better blow it with a hair drier first from a certain distance and then to paste.