Please be cautious and check with your supplier if this product is for virus protection purposes and if the coronavirus (COVID-19) will affect your order.
•Universal AC input/ full range
•Built-in active PFC function,PF>0.95
•Protections: Short circuit/ Over load/ Over voltage/ Over temperature
•Forced air cooling by built-in DC fan
•Fixed switching frequency at 100KHz
•2 years warranty
Ripple & Noise
DC Adjustment Range
Setup, Rise, Hold Up Time
800ms,50ms,16ms/230VAC 2500ms,50ms,16ms/115VAC at full load
88~264VAC 120~370VDC frequency: 47~63 Hz
5A/115 VAC 2.5A/230VAC
PF>0.95/230VAC,PF>0.98/115VAC at full load
105%-135% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
Protection type: Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, recovers automatically after temperature goes down
Working Temp. Humidity
-20℃~+65℃; 20%~90 % RH non-condensing
Storage Temp. Humidity
-40℃~+85℃; 10%~95 % RH
10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG: 0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/25℃/70% RH
Design refer to UL60950-1,TUV EN60950, CCC
Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024, light industry level, criteria A
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.