PU8730,one component direct glazing polyurethane adhesive, can be used for the high strength adhesion of the glass and the body of the automobile.
PU8730 can be directly used for the high strength adhesion of the glass and the body of the automobile.
1. Single Component, Moisture-solidifying, and No Dripping for Vertical Plane Construction
2. Fast Solidification; Elastic, Good Initial Adhesion, High Strength; Outstanding Application Property
3. Good Adhesion with Various Base Materials Such As Glass, Aluminum Plate etc.
4. High Dynamic Load Enduring Ability; Short Drawing Wires When Gluing Stops
5. No Corrosion on Base Material, No Penetration Pollution; Little Volatile Odor
6. Good Aging Resistance and Weather Resistance Property; Paint-sprayable Surface
Surface Dry Time (min)
Resistance to low temperature℃
-45℃ No Fracture
Service temperature(continuous) short term(up to 8hrs)
Clean before operation
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease,
frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.
Direction of operation
Tool:Manual or pneumatic plunger caulking gun
1.Cut nozzle to give the required angle and bead size 2.Pierce the membrane at the top of the cartridge and screw on the nozzle 3.Place the cartridge in an applicator gun and squeeze the trigger with equal strength
1.Clip the end of the sausage and place in barrel gun 2.Screw end cap and nozzle on to barrel gun 3.Using the trigger extrude the sealant with equal strength
1.Obtain a new windshield. 2.Remove the plastic surround side and top mouldings correctly. 3.Cut the urethane from the outside between the glass and the pinchweld. 4.Apply a windshield primer to the frit band. 5.Apply the urethane with an electric caulking gun. 6.Lift the windshield into place. 7.Push the window down around the frame to guarantee a tight bond. 8.Allow the urethane to dry.
Keep in cool and ventilative place Temperature≤25°C, humidity≤50%RH,
Guarantee Period: in the original package and under the above-mentioned conditions:9months for aluminum barrel package,6months for soft package, and 9 months for big barrel package.
Packing And Shipping
1.Q:Delivery time ?
A: Normally,delivery time of sample order is 7 to 10 days, standard order is 15-20 days.
2.Q:How to get samples ?
A: Normally,Sepna offer our customer 1-2pcs or 50-100g free samples for quality testing.
3.Q:How to be Sepna’s distributor ?
A: As the growing of Sepna’s global business,we need to find more and more distributors and agents worldwide.Sepna will provide the best solution and service for our partners. For more information,pls contact our salesperson or call us:+86-400-882-1323
4.Q:Any OEM service ?
A: Yes. Sepna can offer the customer OEM label service,and will give the protection of the your right in your market.