Two components Acrylate resin Low pressure injection machine
This low pressure injection machine is used to inject two component acrylate resin grout
1. Drill holes in the concrete leaking areas.
2. Bury the PU hose into the holes and leave 20cm hose outside.
3. Guarantee the leaking points and cracks near the injection holes should be strengthened by water-stop powder to avoid resin leaking.
4. Connect the “Y” type hose with the injection PU hose and start the grouting
5. During the grouting process, if surfaces start to leak, stop the injection work
and take proper method to seal the leaking areas and start injection work again.
If the injection hose is blocking, you can drill another injection holes and bury the PU