Easy construction, high adhesion, long life, green, completely solve the traditional glue due to poor water resistance
Artificial grass installation glue SJ-700G
SJ_700G is a professional paving PU glue for artificial turf, carpet, PVC floor coverings and other materials used in the laying of two_component adhesives.Easy construction, high adhesion, long life, green, completely solve the traditional glue due to poor water resistance, aging resistance and poor adhesion resulting from failures.The adhesives and construction methods for the construction companies to provide a safe and effective long-term construction methods, construction companies can solve the worries.
Green viscous liquid
Brown transparent liquid
Component A:Component B=7:1
Recommended temperature range
≥30min(After mixed allows Scratch construction time)
60min(After mixed allows to lamination time )
Initial setting time
About 3hr(Reached about 70% strength)
Strength testing time
Performance over the construction of the higher temperature, the shorter the pot life and open time, curing faster; the lower the temperature curing slower.Without using this glue under -10 ℃ , high-temperature environments (ambient temperature is above 40 ℃), will greatly reduce the pot life of the product. If the ambient temperature is too low, place component B above 5℃ for one night before mixing two component is suggested.
Supporting the use of the whole barrel is generally recommended, if only some of the products used, weighing two-component, should be accurate and correct.
The foundation must comply with standards laid artificial turflawn preparation.
Before laying the lawn, first spread the entire volume lawn, paved dry for several hours or more, in order to eliminate the winding package generated internal stress.
2.Two component mixing:
Pouring component B into component A, mixing color uniformity to construction.
Using the tooth-shape gray knife to scratch glue evenly on clean and dense cement foundation(or the special interface ), press fit within the opening hours .the normal temperature , dry for 10-30 minutes for bonding. Scratch the proposed preference clean dense cement foundation in this way, because this way you can achieve the effect of completely destroyed lawn.
4.Paste artificial turf
According to lawn supplier guidelines for paving lawn. Scratch glue, during opening hours ( at25 ℃ about 60 minutes), along the interface with the pavement artificial turf, in order to ensure adequate adhesion, should be in the glue around two hours(25 ℃) in already pavement once on the lawn with heavy rolling compaction (or manually stamped real time), and the interface with the lawn to avoid contact with the ground or cement is not sufficient, the result is not strong bond issue. About 2 days after the lawn can be put to use.
slit width 30cm interface with, or clean and dense cement foundation, the amount about 0.3-0.4kg per meter.
Under normal conditions, the original packaging unopened can store at least 6 months. Transport and storage process, should pay attention to product antifreeze. Product can not be placed below 0℃environmentfor a long time.