CC1310 Low Power SOC Remote Controller Industrial Grade RF Module

Feedback Ratings
US $2.90 / Piece |10 Pieces (Min. Order)
- + Pieces available
0piecesselected, US $in total
View Details
Please confirm the quantity of the goods.
Quick Details
Model Number:
Brand Name:
Place of Origin:
Guangdong, China (Mainland)
Applications 1:
ISM and SRD Systems
Applications 2:
Low-Power Wireless Systems
Applications 3:
Smart Grid and Automatic Meter Reading
Applications 4:
Home and Building Automation
Applications 5:
Wireless Alarm and Security Systems
Applications 6:
Industrial Monitoring and Control
Applications 7:
Wireless Sensor Networks
Applications 8:
Wireless Healthcare Application
Applications 9:
Key Features:
433MHz RF Transceiver, also working on 315M/470M/510M/779M/868M/915M

CC1310 Low Power SOC Remote Controller Industrial Grade RF Module



VT-CC1310-915M RF Module is designed base on Texas Instruments SoC chip CC1310. It integrated with a high performance RF core and a ARM®Cortex®-M3 controller. The RF matching work has done. All of the GPIOs are routed out for using.

Thanks to its ultra low power feature, the module is extremely suitable for the battery power systems. And thanks to its small size, the module can be easily installed in existing systems without any external circuits.






Key Features

868MHz RF Transceiver, also working on 315M/470M/510M/779M/868M/915M

Programmable modulation: (G)FSK,OOK,MSK

Programmable output power from -10dBm to +14dBm

Sensitivity up to-124dBm in Long-Range Mode

Programmable data rate from 0.625bps to 4Mbps

Forward error correction

Data whitening mode-switch support

Automatic CRC

Automatic listen-before-talk (LBT)

Clear channel assist (CCA)

Digital RSSI

Voltage from 1.8V to 3.8V





ISM and SRD Systems

Low-Power Wireless Systems

Smart Grid and Automatic Meter Reading

Home and Building Automation

Wireless Alarm and Security Systems

Industrial Monitoring and Control

Wireless Healthcare Application

Wireless Sensor Networks


Related Product
Company Information


Packaging & Shipping




Reason and Solution

Can’t communication

1.The power supply connect not well, check the module VCC whether it is out of maximum rating.

2.The signal line connect not well, check the module SPI interface.

3.The settings of the transmitter module and receiver module are not the same. Check these modules’ register configuration.

4.Signal block. If the transmitter work with a high TX power, and the receiver was put at a short distance(<0.5m), maybe there is a signal block to make no communication.

Communication distance is too short

1.The application environment is too bad or the antenna is shield. Put the antenna to a better place outside or higher throw a coaxial line , replace it with a higher gain antenna.

2.The work space contains a same frequency interference source, or a strong magnetic field interference, power source disturbance. Try to change the carrier frequency or get far away from the source of the disturbance.

3.The power supply is not strong. Check the voltage and the current whether it is enough.

High data error

1.The power supply ripple is too big, Change the power supply.

2.Check the module register configuration, it is recommended to set as the CC1120-datasheet.

3.There is a carrier frequency interference, change the channel.

4.The antenna unmatched to the module RF interface, change another matched antenna.