notice Note: Please be cautious and check with your supplier if this product is for virus protection purposes and if the coronavirus (COVID-19) will affect your order. close

Core207Z STM32F207ZxT6 STM32F207 STM32 ARM Cortex-M3 Evaluation Development Core Board with Full IOs

$28.32 / Piece | 1 Piece (Min. Order)
- + Pieces available
0piecesselected, US $in total
View Details
Shipping fee:
Depends on the order quantity.
Lead Time:
3 day(s) after payment received
Contact Supplier
Report Suspicious Activity
Quick Details
Model Number:
Brand Name:
Place of Origin:
Guangdong, China
Part Number:
STM32F4 ARM Cortex-M4 Development Board
Onboard MCU:
STM32F207ZxT6 (STM32, LQFP144)
For use with:
STM32F207Z Development & Study
STM32F207Z Development & Study:
clock circuit, USB power management, boot mode selection
Debugging interface:
1 x USB
Programming interface:
User Guide:
DVD is included

Packaging & Delivery

Selling Units:
Single item
Single package size: 
20X15X10 cm
Single gross weight:
0.500 kg
Package Type:
Lead Time :


Model Number: Core207Z
Category: STM32F4 ARM Cortex-M4 Development Board
Onboard MCU: STM32F207ZxT6 (STM32, LQFP144) 
For use with:  STM32F207Z Development & Study
Features:  clock circuit, USB power management, boot mode selection
Debugging interface: 1 x USB
Programming interface: JTAG/SWD 
User Guide: DVD is included
Product Description:  STM32 small board with the STM32F207ZxT6 MCU, full IO expander, JTAG/SWD debug interface

Core207Z is a small STM32 development board that features an STM32F207ZxT6 device as the microcontroller, supports further expansion. It is ideal for starting application development with STM32F family.

As a minimal ready-to-run system, the Core207Z integrates USB communication interface, JTAG/SWD programming/debugging interface, clock circuit, USB power management, boot mode selection, and so on.

Furthermore, pin headers on the backside allow the Core207Z to be plugged-in your application board and act as the MCU core circuit in your system. All the I/O ports are accessible on the pin headers, and the header pitch is designed as 2.00mm.




What's on  board

  1. STM32F207ZxT6: the high performance STM32 MCU which features:AMS1117-3.3 (on bottom side): 3.3V voltage regulator
    • Core: Cortex-M3 32-bit RISC
    • Operating Frequency: 120MHz, 150 DMIPS/1.25 DMIPS/MHz
    • Operating Voltage: 1.8V-3.6V
    • Package: LQFP144
    • Memories: 512kB/1024kB Flash, 128+4kB SRAM
    • MCU communication Interfaces:
      • 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C
      • 1 x FSMC, 1 x SDIO, 2 x CAN
      • 1 x USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, ULPI and on-chip full-speed PHY
      • 1 x 10/100 Ethernet MAC
      • 1 x 8 to 14-bit parallel camera interface
    • AD & DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)
    • Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
  2. MIC2075 (on bottom side): onboard USB power management device
  3. Power supply switch, powered from 5Vin or USB connection
  4. Boot mode switch, for configuring BOOT0 pin
  5. Power indicator
  7. Reset button
  8. 8M crystal oscillator (on bottom side)
  9. 32.768K crystal (on bottom side), for internal RTC with calibration
  10. JTAG/SWD interface: for debugging/programming
  11. USB interfaceMCU pins expander, VCC, GND and all the I/O ports are accessible on expansion connectors for further expansion
    • as DEVICE, used for establishing USB communication between PC and the STM32 development board
    • as HOST, connecting to USB devices such as USB flash drive through a USB OTG cable
  12. MCU pins expander, VCC, GND and all the I/O ports are accessible on expansion connectors for further expansion
  13. 5Vin pinheader, 5V power supply is required when using USB HOST/OTG
  14. USB HOST/OTG jumper
    • short the jumper when using USB HOST/OTG
    • open the jumper to disconnect from I/O port
  15. VBAT selection jumper
    • short the jumper to use system power supply
    • open the jumper to connect the VBAT to external power, such as battery
  16. VREF selection jumper
    • short the jumper to connect VREF+ to VCC
    • open the jumper to connect VREF+ to other custom pin via jumper wire







JTAG/SWD interfaces




Development Resources


Core207Z STM32 development board comes with a User Guide CD including development resources listed as below:

  • Related software (KEIL etc.)
  • Examples in C
  • Schematic (PDF)
  • Development documentations














Core207Z provides JTAG/SWD debugging interface, yet does NOT integrate any debugging function, a debugger is required.
Mother board and programmer/debugger in the photos are NOT included in the price.  






Package Contains

  1. Core207Z development board x 1
  2. USB type A to Mini-B cable x 1
  3. User guide CD x 1









Packaging Details

Unit Type: piece
Package Weight: 0.200kg (0.441lb.)
Package Size: 20cm x 18cm x 10cm