Hot sales high qaulity lockpick reader/decoder (TOY48) for Cylind lishi locksmith tools 075049

Feedback Ratings
US $34.32 / Piece |1 Piece (Min. Order)
- + Pieces available
0piecesselected, US $in total
View Details
Please confirm the quantity of the goods.
Report Suspicious Activity
Quick Details
Hand Tools
Item number:
3 months
Original size
HK Post,China Post,DHL,EMS



Hot sales high qaulity lockpick reader/decoder (TOY48)  for New Lexus, Cruiser,Crown Cylinder  Lishi locksmith tools  075049


*Operate easy, convenient,all stainless steel refined;


*Durable, provide wholesales;


Opening direction:


when the main operater cabin on the left side use clockwise opening, counterclockwise to open when the right;


This lock need to open twice, it will stucked at the 45 degree place in the first opening, cause there have a half slice as resistance shrapnel,turn all as 90 degree after relieved the lock cylinder and can be open the lock;


when return this lock, it will stucked at 45 degree again,still need to relieve the resistance to return the shrapnel;


Lock introduction:
The lock including 10 shrapnel, 3 teeth depth number, they're 1,3,5,NO.5 the most shallow, NO.1 is the deepest,


You can found the 10 shrapnel on the door lock,ignition and the trunk,there have 4 group shrapnel on the glove box;


Read teeth: after open is read;


Special skills: TOY48 internal milling 4 track opening method and cut the key:


Internal milling 4 track key, it means have 4 working track,so called 4 track,but both side of this key are same,this tool including A group 2 pry bar and B group pry bar.


Opening method are as below:


about this lock,can be read out the teeth number of A group and B group if can not open,and noted all the read teeth number,then according to teeth number to open will be more convenient,(needed make keys can be use this way to read out teeth number directly);


Read teeth method:


Push rod thrust augmentation towards the left and compressed,meantime,use pry bar A to press the shrapnel which can touched one by one,after compressed,pry bar indicated by the numbers is just the teeth number of the shrapnel,according to this way,Push rod thrust augmentation towards the right and compressed,use pry bar B to press the shrapnel which can be touched one by one,can be read out B group teeth number,


Note:1.this way can be called"strengthen left read A,right read B"


2.It need pry bar to compress the shrapnel when read number.but don't make it moving,if shrapnel moved like when we open the lock before,so can't read number,need operate again,


3. This way can't available for every car lock,this way only limited the internal constructions of lock cylinder;


This lock have A group and B group,and its 5 group half slice,total is 10 slices,A group 5pcs and B group 5pcs,No.1 is the most deepest,we can called its closest the edge,NO.5 is the most tallest,when cut the key,5 don't need cut,just cut 1,3,please adjust the angle,make it straight,put 2 slice together and insert keyhole,then testing,if turned,please adjust the angel more slippery;


Now known the teeth number and opening:


Open A group first,this lock towards tailstock open,port to the rear of the car,


Open the 3 and 5 of A group,after finished,then open the 3 and 5 of B group,pay attention to control the magnitude of the pry bar,after opened the A-B group,turn the lock as 45 degree,after turned 45 degree,this lock have to go on opening B group,


After open the lock,need turn the lock,its 3,5 of B group,control the dynamics;






Related Products


4DG copy chip for Toyota                                            JMA copy chip (TPX5)


075102                                                                081060 


011065                                                              015019