SUS304 material with Flange Small size and easy to installtion 10W/50W suit for option Low cost,Best quality
We can according to different demand customed-make different liquid level switch~If you have any need pls feel easy to chat with us~We will try to give you best serves~
The principle of operation
Liquid level sensors by the composition of reed switches andfloat, reed switch encapsulated in the guide, and a ring mag-net is equipped in the float, w-hen the float moves up and d-own with the measured of liquid level,and the internal magnet to attract magnetic reed switch contact action,so that it can to detect the liquid level position.
1.Should be mounted away from the inlet, or switch will caused malfunction by the fluctuations in intake.
2.The load must be controlled circuit capacity with float switch contacts to match.
3.The proportion of liquid to be measured must be greater than the proportion of float.
4.Float action points have been ordered by the customer requirements adjusted at the factory, Please do not adjust the float position.
Max Contact Rating
Max Switching Voltage
Max Switching Current
Max Breakdown Voltage
Max Carry Current
Max Contact Resistance
Float Ball Materia
Float Body Material
Top or bottom of the vertical installation
Floating on or fall on (optional)
Water, oil, chemical media
Periodically clear the guide rod and float on the dirt (as the media cycle may be).