OOK/MSK 915HMz RF module cc1310 for forward error correction

Feedback Ratings
US $2.90 / Piece |10 Pieces (Min. Order)
Quantity:
- + Pieces available
0piecesselected, US $in total
View Details
Shipping:
Please confirm the quantity of the goods.
Overview
Quick Details
D/C:
20160928
Package:
others
Model Number:
VT-CC1310-915M
Type:
module
Brand Name:
V-chip
Place of Origin:
Guangdong, China (Mainland)
Frequency:
OOK/MSK 915HMz RF module cc1310 for forward error correction
Frequency Error:
±10ppm
Modulation:
G)FSK/OOK/MSK
Data Rate:
0.625bps~4Mbps
Output Power:
-10dBm ~ +14dBm
Sensitivity:
-124dBm
Tx Current:
23mA
Rx Current:
5.5mA
Standby Current:
0.6uA
Distance:
700

OOK/MSK 915HMz RF module cc1310 for forward error correction

 

Overview

VT-CC1310-915M RF Module is designed base on Texas Instruments SoC chip CC1310. It integrated with a high performance RF core and a ARM®Cortex®-M3 controller. The RF matching work has done. All of the GPIOs are routed out for using.

Thanks to its ultra low power feature, the module is extremely suitable for the battery power systems. And thanks to its small size, the module can be easily installed in existing systems without any external circuits.

 

 

 

Features

 

Key Features

868MHz RF Transceiver, also working on 315M/470M/510M/779M/868M/915M

Programmable modulation: (G)FSK,OOK,MSK

Programmable output power from -10dBm to +14dBm


Sensitivity up to-124dBm in Long-Range Mode

Programmable data rate from 0.625bps to 4Mbps

Forward error correction

Data whitening

8.2.15.4g mode-switch support

Automatic CRC

Automatic listen-before-talk (LBT)

Clear channel assist (CCA)

Digital RSSI

Voltage from 1.8V to 3.8V

 

Applications

 

Applications

ISM and SRD Systems

Low-Power Wireless Systems

Smart Grid and Automatic Meter Reading

Home and Building Automation

Wireless Alarm and Security Systems

Industrial Monitoring and Control

Wireless Healthcare Application

Wireless Sensor Networks

Active

Related Product
Company Information

 

Packaging & Shipping

 

FAQ

Description

Reason and Solution

Can’t communication

1.The power supply connect not well, check the module VCC whether it is out of maximum rating.

2.The signal line connect not well, check the module SPI interface.

3.The settings of the transmitter module and receiver module are not the same. Check these modules’ register configuration.

4.Signal block. If the transmitter work with a high TX power, and the receiver was put at a short distance(<0.5m), maybe there is a signal block to make no communication.

Communication distance is too short

1.The application environment is too bad or the antenna is shield. Put the antenna to a better place outside or higher throw a coaxial line , replace it with a higher gain antenna.

2.The work space contains a same frequency interference source, or a strong magnetic field interference, power source disturbance. Try to change the carrier frequency or get far away from the source of the disturbance.

3.The power supply is not strong. Check the voltage and the current whether it is enough.

High data error

1.The power supply ripple is too big, Change the power supply.

2.Check the module register configuration, it is recommended to set as the CC1120-datasheet.

3.There is a carrier frequency interference, change the channel.

4.The antenna unmatched to the module RF interface, change another matched antenna.