a) This OTR100 Model hot stamping machine is special designed for decorating various PVC/PS/WPC/ABS/PVC foaming small profiles within 100mm widths; Now it is special used to decorating imitation marble stone profiles;
b) Normally for PVC marble profiles, there have 5-9surfaces, so we always match 10sets of online hot stamping machine to get complete marble designs;
c) It is installed on the extrusion line, before Haul-off machine and after calibration table;
d) The center height of machine is 1000mm per center height of extrusion line.
Part 3. The technical parameter of machine:
Max width of thermoprinting
Max transmitting width
The speed of thermoprinting
1—10 m/min ( adjustable)
Thickness of panels
0.12 KW(with motor)
The total power
380V, 50 Hz
(L*W*H) 750 × 750× 2000 mm
Part 4: Basic assembly of OTR100
4.1) Transmitting unit
The whole machine adopts 50*50 square tube and Q235 steel plate to weld.
It adopts angle iron to make conveying table.
It adopts cast iron wrapped with nylon to make conveying wheel.
It adopts nylon to control the width of board.
4.2) The angle adjustment unit
It adopts Q235 steel plate to make base-plate, clipboard and joint-plank.
It adopts Q235 steel plate to make big circle wheel.
It adopts 160 hand-wheel to adjust thermoprinting angle by worm wheel and worm.
4.3) The head of stamping control unit
It adopts Q235 steel plate to make erect plank, plank of air cylinder; air cylinder to control stamping head work back and forth.
It adopts ZL102 with the copper slipcover to make guide thimble, and 45 steel for guide pole.
It adopts ZL102 to make slide seat, 45 steels for slide shaft and flat steel to make index plate.
4.4) The stamping head unit
It adopts ZL102 to make base-plate of thermoprinting which connect between slide shaft and slide seat.
It adopts ZL102 to make heating cover and 2 stainless steel heating pump(650w/pc) for heating, the temperature is controlled by TC Panel.
It adopts 45 steels to make axle and seat of thermoprinting.
It adopts ZL102 wrapped with anti high temperature silicon rubber to make stamping wheel.
It adopts 25w gear speed-down motor to drive stamping roller by gears.
4.5) winding & unwinding unit
It adopts 45# steel to make shaft and Q235 to make joint plate.
It adopts organic glass to make clamp for clamping film and aluminum loop to make fixed components.
It adopts 25w electronic timing gear speed-down motor to drive winding shaft by gears.
It adopts Q235 to make joint plate and 45# light&round steel to make shaft of guiding film.
Packaging & Shipping
Packing: by shrinkable film wrapped if shipping by whole container, by export standard wood case if shipping by LCL;
Shipping: FOB, CNF, CIF, LCL
The seller will guarantee the machine quality valid in 15 Months after shipping date, not including
artificial wrong operation. Beyond the duration, the seller will continue all life service of the machinery,
but all repairing or changing parts cost will be at the charge of the buyer.