+1.6% reading per kPa deviation from normal pressure, 100kPa
-10.0~60.0 degree C (14~140 degree F)
0.1 degree C/ degree F
+/-0.6 degree C / +/-0.9 degree F
+/-3% (10~90%) **+/-5% (others)
The industrial wall mount CO2 Sensor & Controller is designed for fast & accurate measurement of CO2 level, humidity and temperatures of air, dew point and wet bulb. Itmonitors CO2 concentration level and can controls ventilation system such as air conditioning to operate only when its necessary without the need for occupant intervention. With CO2 Monitor & Controller you are ensured with a healthy workplace requiring minimum energy consumption while simultaneously maintaining Indoor Air Quality (IAQ). It has 100V-240V power input and Power Adaptor with US, UK, Australian and European plug.
The meter is designed with a built-in relay, which can be connected to an Indoor Air Quality (IAQ) system to control the opening and closing of the system. It also allows you to set 2 limits, upper limit or the maximum CO2 concentration and the lower limit or the normal CO2concentration level. In addition it also has an audible & visual alarm that gives warning whenever the CO2 concentration level exceeds the limit and will only stop when CO2 goes back to normal level or a key has been pressed.
For example, the main unit is connected to a ventilation system (eg: air-conditioning). WhenCO2 readings go over the upper limit, beeps will heard, LED light will be flashing and the relay will automatically turn on and sends an output signal so the fan will be turn on. And once CO2reading fall under the lower limit or reaches the normal CO2 concentration, the beeping will stop, the flashing will stop and the relay will send out an output signal again to close or turn off the fan.
When the unit gets a high reading of CO2 and there is no ventilation system attached, the user will notified via the beeping alarm and flashing LED light and will automatically stop once CO2 concentration goes back to its normal level or a key has been pressed.
In addition, it has PC Link that can send gathered data directly to your PC for on-line logging and data analysis via the optional RS-232 interface and software (not included in set).
Areas of Application:
Hospitals, Offices, Schools, Theaters, Indoor Sports Arenas, High Rise Buildings, Indoor Area Quality, Commercial Buildings, Residential Housing, Public Buildings, Demand Controlled Ventilation, Clean Rooms.
Poor indoor air quality in rooms can lead to fatigue, lack of concentration and illness (Sick Building Syndrome) due to high concentration of CO2 level.
Simultaneous triple result, displaying CO2 level, temperature and humidity
Stable Non-Dispersive Infrared (NDIR) Sensor for CO2 detection
It has triple LCD Display and programmable alarms and built-in Non-Dispersive InfraRed (NDIR) sensor that provides long term stable monitoring
Built-in relay that controls the ventilation system to automatically maintain the CO2 level that you set or specify
Higher accuracy than desktop CO2 Monitor models
Statistics of weighted averages
TWA (Time-Weighted Average) 8 HRS
STEL (Short-term exposure limit) 15 Minutes
Visible & Audible (80db) CO2 warning alarm when CO2 concentration exceeds the set limits
Alarm Output Relay for ventilation control
ABC (automatic Baseline Calibration) and manual CO2 calibration
Long Time Drift Compensation
PC Connect via optional RS232 Software interface (not included in set)
Selectable °C and °F
With Min/Max, Average Recall
Factory pre-calibrated and inspected for precision performance
Large Triple Function LCD Display with digital readout
With calibration indicator and can be mounted on the wall or a desk
Professional-Grade testing tool
With CE Marking, passed the standards and had been approved by European Directives for health & safety
Perfect to be used to monitor air quality in schools, office buildings, greenhouses, factories, hotels, hospitals and anywhere that high levels of carbon dioxide are generated
With 100V-240V power input and include power adaptor with UK / US/ EU / AU plug
Carbon Dioxide (CO2)
2001~9999 (out of scale)
Accuracy: ±50ppm ±5%rdg (0~2000)
Pressure Dependence: +1.6% reading per kPa deviation from normal pressure, 100kPa
Range: -10.0~60.0°C (14~140°F)
Accuracy: ±0.6°C / ±0.9°F
Accuracy: ±3% (10~90%) **±5% (others)
Warm up: 30 seconds
Operating Condition: 0~50°C, 0~95%RH
Storage Condition: -20~60°C, 0~99%RH
Power Supply: 1A Output 12V AC Adaptor
Power Voltage : 100-240V
1 x Wall Mount Carbon Dioxide Monitor
1 x 12V Power Adaptor (available in US / UK / AU / EU plug)
English Operation manual
Standard packaging box
OPTIONAL(not included in the set):
Please inform us if you want any of the following optional items to be included in your order