Application range : 1.Subway,tunnel,culvert,activated sludge tank,Concrete crack seepage,leakage stopunder water. 2.Basement,underground garage,underground passage,crevice in concrete slab 3-through- wall pipe,corner,leakage of water; 4-Concrete structures leaking,Board structure cracks; 5- Injection for the PU grout and epoxy resin grout
Endurable in high pressure, good waterproof effect, stable quality, convenient operation
High toughness rubber, not easy to be fragile High quality aluminum, not easy to be bent
Injection Method Statement
1. Identify the crack.
2. Drill the holes 5 to 10 cm away from the crack at 45 toward the crack.
3. Clean the hole properly.
4. Insert the packer.
5. Fix and tight the packer.
6. Connect the pump to the packer and start injecting.
7. After injection material is totally dry remove the packer.
Tips:When injecting tight cracks, we have found high success rates by drilling straight into the crack to a depth of 2/3 the thickness of the wall (always measure and tape your drill bit for depth). High pressures can be maintained with virtually no spalding blow-outs (as opposed to angle drilling) and excellent grout penetration. Space the packers every 2.5 - 3 inches and a depth of 5 inches for an 8 inch thick residential wall. Use a low viscosity resin such as Leak-Proof polyurethane foam to assure 100% penetration.
Work with the machine
After order, we will choose the best shipping way for you in the same cost (DHL,Fedex, EMS,USP and so on...) shipping days only 4 to 10 days.
1. Orders will be shipped out in 2 days after payment cleared. All items will be tested it well in advance before sending out.
2.We will send you invoice to confirm, after the order please note the email and message, thanks.