10.8-28v 1kw solar inverter 20a 24v battery charger 12v/24v 100v 20a mppt solar controller
1000W Solar Inverter On Grid Directly connect with solar panel Pure sine wave output inverter Efficiency:>99% CE &ROHS
grid tie inverter 1000W, 1KW grid connect solar panel inverter, DC 24-45V to AC 190-250V solar inverter
1.Generates pure Sine Wave
2. Automatic power adjustment 3.Constant Power Output 4. Low distortion output on all ranges 5.Allow different Power factor from loads 6.Compact and light weight design 7.Maximum Power Point Tracking (MPPT) - optimize power output 8.Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring 9.Stackable (connect in parallel for higher output) 10. Aluminum enclosure will act as heat sink to help dissipate heat 11. Simple and safe installation 12. Island protection: Inverter will shut down during black outs. 13.Grid-Tied - sell green power directly back to the grid at a premium rate
Specification for 1000W Solar Inverter On Grid 24V~45V DC
24-45V series models
Grid inverter working conditions The electrical utility grid must have current and voltage is 230VAC(190~260VAC)
Recommend use solar panels
DC Maximum Input Power
DC maximum voltage
DC voltage range
Maximum input current
AC output power
AC maximum output power
AC standard voltage range
AC frequency range
50Hz/60Hz(Automatic detection and adjust)
Output current total harmonic distortion
Phase shift rate
Output short circuit protection
Voltage at Pmax
Maximum output power factor
DC TO AC Conversion efficiency
Work temperature range
-25 °C~60°C(skin temperature)
0~99%(Indoor Type Design)
Indoor Type Design
EN 50178+EN 62109-1+VDE0126-1-12
DIN VDE 1026 UL1741
MPPT using precise function, APL functions, solar panels automatically adjust to maximum output power, simply connect
directly to the solar panel grid inverters, do not need to connect the battery.
* AC 0 angle with high precision auto-detection
AC phase angle of 0 through isolation amplifier and input to the MCU for highprecision detection and analysis, the phase shift rate of only <1%, thus achieving highprecision AC and combining with the phase modulation. output.
*Synchronous High-frequency Modulation
In the course of the grid, usually with the same phase angle and the net (ie, two-phase alternating current total is equal to 0,
with the switch to the two AC fusion) and the product is first rectified AC half-frequency AC to 100Hz, Then the machine
produces high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve
* Pure Sine Wave Output
Adopt SPWMto make pure sine wave output directly.
*Power Automatically Locked (APL)
The current strength of the different fluctuations, we should use the MPPT function, when the MPPT function adjusted to the
maximum power point, the product automatically powers locked in maximum power point, the output power is more stable.
* Maximum Power Point Tracking (MPPT)
Current intensity, voltage constantly changes, if there is no power point tracking, then there will be a lot of problems in the past usually adopted a solar controller, this product uses high-precision MPPT computing power, automatic and immediate to solar
panels output power adjustment in the maximum output point, in order to achieve a stable output purposes
* Automatically Adapt To Different Load Power Factor
Adapt to any of the power load.
* Automatically Shut Down When The Power Output Of a Fault
When the city power system planning power outage there is a failure, the inverter will automatically turn off the output.
* Current Limit Protection
This product is constant current, constant output power, without any overload, over-current phenomenon.
* Stack Multiple Machines (in the parallel machine used)
Multiple machines in parallel can be used to achieve a small power inverter in parallel for the power output
* High-Frequency High Conversion Rate
Use high-frequency converter to make high efficiency.
* 6-grade power search
In overcast weather,the solar battery’s output current is extremely tiny, then inverter will automatic open 6-grade power
1. The program can automatically open power adjustment for 6 times.
2, The current direction can adjust from the maximum to the minimum.
3. In automatic adjustment process, we will see the LOW light flashing. And the power will keep as a starting point, from 0 to
output power, and it will restart at most for 6 times, then locked in the maximum power, the ST lamp long bright.
4. It need 10 minutes for 6-grade power search.
1. Installation Connection
(1). Red terminal: Connect DC positive, black terminal: Connect DC negative. Shown in Figure 1.
(2). AC socket: Connection to the mains. The AC cord to the inverter 3 foot outlet, then the AC cord to home 3PIN AC outlet. Are shown in Figure 2, Figure3.
In order to achieve higher power use requirements, this product can be stacked, such as: 4 grid inverter1000W stacking can achieve 4000W.And the number of the stacking is unlimited. Used as shown
4. Input and output
1. DC input limit
Input voltage range: 24V to 45V
Solar Panel: recommend the use of power greater than 30W, the standard voltage 36V PV panels.
Recommended, and even solar panels, thread will result in high input voltage inverter which exceeds the working voltage range
Wind turbine: Rated voltage 36VDC, maximum voltage 45VDC.
2. AC output:
Output 220V AC power inverter can be used in voltage: 170V - 260V, 50 Hz
Output 110V AC power inverter can be used in voltage range: 90V - 160V, 60 Hz
5. LED Indicator
1. Red LED:
1. Low-voltage protection (input DC voltage is less than 24VDC).
2. Overvoltage protection (Input DC voltage is greater than 45VDC).
3. Over-temperature protection (when the chassis temperature is above 75, the temperature dropped about 2-10 minutes to restart automatically after cooling).
4. Fault Protection (when 110VAC or 220VAC power outage or shutdown).
5. Islanding protection: electricity disconnected, the inverter automatically shut down output.
We are factory:
1), Our R&D team had more than 8 years experience in both on grid and off grid solar and wind systems, Professional !!
2), Our company had more than 8 years experience in exporting to more than 90 countries in different quantity orders;Professional!!
3), We have strong after sale service team to provide you the best service.
4), We accept mix type of models for sample order and batch for your many choose to get winner client and market.
We have stock and semi-finished products with enough base materials for new sample and order for all the models , so small quantity order is accepted, it can meet your requirement very well, Eg: 1pcs, 5pcs, 10pcs, 20pcs, 50pcs, 100pcs, 200pcs, 500pcs, 1000pcs etc different quantity for you choose; we believe our price and matched quality will give you an edge over your competitors, then you will be the winner in this business in your country.
We try our best to ensure our price to be the lowest one in the same level quality products--Factory lowest price for you!
Good Quality and Certificated Products:
We have strict quality control system, good reputation in the market. Our long term customers always feedback our products quality is very good so that they gain many regular customers and business comes so easy. All the products are CE& ROHS & EU certificated.
We can do OEM for you,products with your own brand to win your local market is very easy!
Fast Delivery & Cheap shipping cost and best service team are provided for you:
1) Generally, we prepared stock for all the standard models, so we can arrange the delivery for sample order in the same day of payment arriving; we also have halffinished products to accept customized production to meet your different requirement in a short leading time.
2) We have long term cooperation contract with primary agency of DHL, Fedex, UPS TNT and EMS express with big discount price, as well as air way and sea shipping; it is fast and safe, what’s more, it will save you quite a lot money and time!!
3) If you need, we can low down some price value on the shipping invoice for you for samples so that you will save much money on the sample test order.
4) We have Professional sales team to serve you with 24 hours online.
Q1:Can I have a sample for testing?
A: Yes, you are welcome to test samples before quantity order; Sample order will be sent out 2- 3 days generally.
Q2:Can I add my logo on the products?
A:Yes,OEM and ODM are available for us.
But you should send us the Trademark authorization letter.
Q3 :Do you have inspection procedures?
A:100% self-inspection before packing
Packaging & Shipping
Shanghai Tingen Electric Co., Ltd
Tel: 86-021-33197905 FAX:86-021-51685686
Tips:Many thanks for your visiting our store, and if you have any question, pls contact me at any time and I will give you reply as soon as possible!