The following guides you how to set up. Hope this device will bring you nice digital experience. With ezcap241 music digitizer, you can easily convert your old analog music to MP3, and save into USB drive or SD card without computer, and it can automatic partition each songs of all the music.
Power on ezcap241 with 5V DC (most USB port supply 5V DC), connect audio source to line in with 3.5mm cable, or RCA cable, you can plug a earphone to the line out port to listen the input audio. Plug a USB drive or SD card (don’t do it at same time), make sure they are FAT32 (FAT) or exFAT format (not support NTFS). Better to format the storage before using on ezcap241, and keep the storage near to empty, otherwise will cause recording error. Now ezcap241 is under standby mode (green indicator keep on), and the color of indicator is green shows it at default manually mode. Just simply press the recording button of the box, or button of remote controller, then the device will start to recording (converting) the playing music to MP3 format, the green indicator will be quick flashing (if not, means not recording, re-plug your USB flash and try again) . Press the recording button again to stop recording and save a MP3 file in USB drive. At the interval between two songs where you want to save in another file, short press NEXT button of remote controller, the flashing green indicator will be off about 2 seconds, then quick flash again to save in another file. Device will create a new folder name “TAPEMP3” in your USB drive, and save each MP3 name “FV0001 to FV9999”. If you want do it at auto mode, simple at standby mode long press NEXT button 3~5 seconds, till you see the indicator from green to blue. At auto mode, ezcap241 will detect each interval between two songs, and will save them in two files. If you want to switch back to manual mode from auto mode, stop recording(or playback) to standby mode (blue indicator keeps on), long press NEXT button 3~5 seconds, till you see the indicator from blue to green, or simply power off ezcap241, then power on again, it will load at default----manually mode . Note: For better recording, (also for better division in auto mode), please turn the volume of music source to bigger enough.
The device with playback function so you can easily checking the recorded file. At standby mode, press playback button, device will start to play the recording music, the indicator will be slow flashing. Press playback button again, will stop playback and back to standby mode. During playback, use up/down button to choose play previous or next file. Use volume up down button to set volume up and down. You can also copy other MP3 files to USB drive and plug to our device to play them, but only files in “TAPEMP3” folder can be played.