1 GPS vehicle&truck tracker
2 Monitor Voice&fuel
3 Free Online Tracking service
5 8Mb data logger
gps car tracker TK108 gprs gps gsm tracker
*1* Key Functions of gps tracker vehicle tracking system TK108
*2* Preface of gps tracker vehicle tracking system TK108
gps tracker vehicle tracking system TK108 is the cost-effective solution for security & real-time tracking. It is specially used for car/truck tracking because of its compact size and strong functions.it is a mini gps tracking system, vehicle gps tracking system, mini vehicle gps tracking system and mini vehicle tracking system.
The default user password is 111111. If the user password is changed, user should send the SMS command with the new user password instead of 111111. XXX is the control code, all the letters must be capital letters or in small letters, command with mixed capital letter & small letter is not recognized by system
*3* Arm/Disarm by Phone Calling
User could also use the 1st alarm-received mobile phone to call the tracker SIM card number, so as to arm/disarm the system. Arm: After hearing several ring tones, if the systems hang up the call automatically, and call back you, it means that the system is armed. Disarm: After hearing several ring tones, if the system hangs up the call automatically, and don't call back you, it means that the system is disarmed.
*4* Check the Vehicle’s Statu
SMS command: 111111CHK (or 111111chk) This instruction is used to inquiry the vehicle's location & system's status. The system will send back the SMS, includes the similar information, such as “Tracker Armed……” User could also use the 2nd alarm-received mobile phone to call the tracker's SIM card number, the tracker will hand up the calling & send back the location directly.
*5* Arm/Disarm the System by SMS
SMS command: 111111ARM (or 111111arm)
This SMS instruction is used to arm the system When the system is armed, the movement alert is activated automatically. When the car moves, the alarm will be triggered.
SMS command: 111111DSM (or 111111dsm)
This command is used to disarm the system & stop sending alert SMS
*6* Check the location by Google Map’s URL
SMS command: 111111MAP (or 111111map) Upon receiving the SMS command, the tracker will automatically send back the SMS including the Google map's URL, user can use smart phone (GPRS data service is enabled) to open the URL link, the car's location will be showed on the Google map.
*7* Check the Real Physical Address
SMS command: 111111ADD (or 111111add) When user sends this SMS command to the tracker, the tracker will automatically send back the car's real physical address (such as city name, street name) to your mobile by SMS. There is no need for the user to setup any server, but it needs supports from our TS03 server.
*8*Change User Password
SMS command: 111111PSWnnnnnn (or 111111pswnnnnnn) This instruction is used to change the user password. The length of the user's password is 3~6 digits. Users are suggested to change to the new password in use.
*9* Stop the Car by SMS
SMS command: 111111STP (or 111111stp) This instruction is used to stop the car immediately SMS command: 111111STPN (or 111111stpN) This instruction is used to stop the car gradually. Example:111111STP30, if the car's speed is higher than 30KM/h, the car is stopped gradually by impulse control, if the car's speed is lower than 30Km/h, the car is stopped immediately
*10* Restore the Stopped Car to Normal Status
SMS command: 111111RES (or 111111res) It is used to restore the car to normal status after being stopped.
*11* Monitor the Voice around the Car
SMS command: 111111MONP This instruction is used to monitor the voice around the car. The SIM card inside the system pays for the communication fee. The P is the telephone which is used to monitor the voice. When user send out this SMS to the system, the system will call back the telephone P, user could listen in the voice around the car upon picking up the call. If you use the present mobile to carry out the monitoring, you can let the P as blank, sending 111111MON is OK.
*12* Over-speed Alert
111111SPD:X x is the speed in KM/H , maximum value is 255M/H (For example: 111111SPD:120, if the car speed is over 120KM/H, it will send alert SMS to warn you). 111111SPD:0 to disable the over-speed alert. It is the default setting. 111111SPD: to check the setting of over-speed alert. Remark: this function is just for reference, because there might be some time delay or error in detecting the running car’s real speed by GPS. Default speed limitation is 150KM/H.
*13* Set up the Shock Sensor
111111SHK: To check the setting of shock sensor. 111111SHK:S=X,N=Y, X: is the time in seconds, range:1-200: 1-20 seconds Y: is the vibration times. (Default value: X=20: 2seconds, Y=6: 3 times.) Example:111111SHK:S=30,N=8, : if tracker is vibrated 4 times in 3 seconds, it will trigger vibration alarm. If Y value is smaller, the sensitivity is higher.
*14* Odometer & Engine Run Time
111111ODO: It is used to read the present odometer & engine run time. 111111ODO:O=X,H=Y, it is used to set the basic value of odometer and engine run time. (X: meters, Y: seconds) Example: 111111ODO:O=300,H=10, it means that the basic odometer is 300meters, basic engine running time is 10 seconds. System will start accumulation from this basic values.
*15* Define SMS Content in Different Languages
SMS command: 111111LNG:X it is used to define the SMS content in different languages. X=0, English; X=1, Chinese; X=2, Arabic; X=3, Portuguese; X=4, Spanish; (Default setting: X=0, English)
*16* Alarm Types of gps tracker vehicle tracking system GT08
In arming status,if the car is vibrated, it will send out alarm SMS.
Power Failure Alarm
In arming status, if the battery is cut off, it will send out alarm SMS.
Engine ON Alarm
In arming status, if the car's engine is ON, it will send out alarm SMS and call the preset phone.
In arming status, the movement alert is enabled automatically. Once the car moves away from the parking point for 100 meters, it will it will send out alarm SMS and call the preset phone.
Once the Geo-fence is activated, if the car oversteps the boundary, it will send out alarm SMS.
If the car runs over the speed limitation continuously for 3 minutes, it will send out alarm SMS.
SOS Alarm (Optional)
In any condition, if the SOS button is pressed, it will trigger the SOS alarm. (NOTE: the SOS alarm will only be sent to the 2nd phone, the 3rd phone number & the GPRS tracking center, the other alarms will send to all the preset phones & GPRS tracking center.)
If the trigger line detects a continuous positive signal for 5 seconds, it will send out this alarm.