Computer, Mobile Phone, huawei router cisco router
More and more Android smartphones and tablets are becoming available to consumers equipped to support USB On-the-Go (OTG). This awesome feature lets users connect any USB device, even full-sized keyboards, to their Android gadgets and utilize them. Below is a tutorial how to make your own USB OTG cable. Let the DIY projects begin! While most tablets and smartphones have mini or micro USB to allow for their slim and sleek body case, the Micro USB ports mostly all support OTG – so plugging in your custom USB drive and accessing its software from your phone is here. Your phone is now more computer than anything else!
USB2.0 RS232 cable
With OTG, support Android device or Mac pad
eg. tablet PC, port PC, mobile phone, panel PC, pad, etc
Micro 4&5 short connected, support mobile phone to connect RS232 device
For POS terminal, scanner, router, modem with RJ45 or audio jack device.
300 ~ 1M baud rate speed
Support Android, with APK files(available from sinforcon.com websites)
Drivers are available which allow FTDI devices to work with the following operating systems:
Windows 8.1 x64
Windows 8 x64
Windows Server 2008 R2
Windows 7 x64
Windows Server 2008
Windows Server 2008 x64
Windows Vista x64
Windows Server 2003
Windows Server 2003 x64
Windows XP x64
Mac OS X
Mac OS 9
Mac OS 8
Windows CE.NET (Version 4.2 and greater)
Support for WinCE7.0 Initial functional testing conducted by FTDI has shown that the FTDI drivers function as expected on Windows CE 7.0
Support for older versions of Windows Desktop
NOTE: Microsoft have ended support for certifying XP and VISTA through their WHCK test program. As such current builds will still work on XP and VISTA but are not Microsoft certified.
Differences in Driver API
For most of these operating systems two types of driver are available: Virtual COM Port (VCP) drivers and direct (D2XX) drivers. The VCP driver emulates a standard PC serial port such that the USB device may be communicated with as a standard RS232 device. The D2XX driver allows direct access to a USB device via a DLL interface.
To locate the drivers you want to install for a device, select which of the driver types you wish to use (VCPor D2XX) and then locate the appropriate operating systems. With the exception of Windows 98 and Windows ME, all devices are supported in each driver package.
If a VCP driver is required for Android please refer to the following application note: TN 132 Adding FTDI Devices VCP Driver Support to Android
About PL2303TA PL2303TA USB to Serial Bridge Controller
PL2303TA provides a convenient solution for connecting an RS232-like full-duplex asynchronous serial device to any Universal
Serial Bus (USB) capable host. PL2303TA highly compatible drivers could simulate the traditional COM port on most operating
systems allowing the existing applications based on COM port to easily migrate and be made USB ready without having to
rewrite the COM port software application.
By taking advantage of USB bulk transfer mode, large data buffers, and automatic flow control, PL2303TA is capable of
achieving higher throughput compared to traditional UART (Universal Asynchronous Receiver Transmitter) ports.When real RS232
signaling is not required, baud rate higher than 115200 bps could be used for even higher performance. The flexible baud
rate generator of PL2303TA could be programmed to generate any rate between 75 bps and 6M bps.
PL2303TA is exclusively designed for mobile and embedded solutions in mind, providing a small footprint that could easily
fit in to any connectors and handheld devices. With very small power consumption in either operating or suspend mode,
PL2303TA is perfect for bus powered operation with plenty of power left for the attached devices. Flexible signal level
requirement on the RS232-like serial port side also allows PL2303TA to connect directly to any 3.3V~1.8V range devices.
Single-chip upgrade solution for Legacy RS232 devices to USB interface USB to RS232 converters/cables/dongles Healthcare/Medical USB Interface Data Transfer Cable Personal Infotainment/Media Player Docking USB Interface Cellular/PDA USB Interface Data Transfer Cable Serial-over-IP Wireless Solution USB Barcode/Smart Card Readers GPS/Navigation USB Interface Point-of-Sale (POS) Terminals/Printers PC Docking Station/Port Replicators Industrial/Instrumentation/Automation Control USB Interface USB Modem/Wireless/Zigbee USB Interface Set-Top Box (STB) / Home Gateway USB Interface BatteryCharger Application MCU-based devices to USB interface
Windows Driver Installer Setup Program (For PL2303 HXA, XA, HXD, EA, RA, SA, TA, TB versions) Installer version & Build date: 1.9.0 (2013-10-25) Windows XP (32 & 64-bit) WDM WHQL Driver: v22.214.171.124 (10/22/2013) - Windows XP Certified WHQL Driver - Compatible with Windows 2000SP4 & Server2003 Windows Vista/7/8/8.1 (32 & 64-bit) WDF WHQL Driver: v126.96.36.1993 (10/17/2013) - Windows Vista, 7, 8, 8.1 Certified WHQL Driver - Compatible with Windows Server2008/Server2008R2/Server2012 - Driver can auto-download via Windows Update (for Windows Vista, 7, 8, 8.1)
Installer Language Support: English (default), Chinese (Traditional and Simplified), Japanese For Prolific USB VID_067B&PID_2303 and PID_2304 Only Includes Certification Report, User Manual & CheckChipVersion Tool
Windows 8/8.1 are NOT supported in PL-2303HXA and PL-2303X EOL chip versions. Run PL2303 CheckChipVersion tool program in Windows XP/Vista/7 to check chip version. Windows 98 and Windows ME driver support is discontinued and is no longer provided. Prolific recommends to use PL-2303HXD (HX Rev D) or PL2303TA chip.
Packaging & Shipping
Q: Can I buy the cable online?
A: Yes, please buy it on aliexpress.com/store/401907, it support credit card payment.
Q: Does this cable need to install driver?
A: Yes, it need to install the USB serial drivers for different OS
Q: Where should I get the drivers?
A: From sinforcon.com/download or the chips supplier website or email us