this wireless router can support openwrt , if you don't need openwrt function , you can tell me ,then i will only do 3g router /4g router to you .( this 3g router and 4g router need plug 3g modem or 4g modem . )
( Flash:4M(Max.32M),SDRAM:32M(Max.256M) ) which one you like ?
Portable 300M Wireless Broadband Router
Thank you for purchasing portable wireless broadband router.
Applicable to portable Wireless-N wireless broadband router, this Installation Guide provides a WebUI-based configuration method and procedure. In this guide, Windows 2000/XP is used as an example.
Please check for the following items in the packing box:
² 300 Mbps wireless router × 1
² Power adapter × 1
² Quick Installation Guide × 1
² Warranty Card × 1
DC input, connecting to a5V/1A usb power adapter
Reset key. Pressing this key for 5 seconds will restore the router to factory settings.
TF Card slot
For inserting TF storage card
RJ45 port for connecting to an internet access device such as ADSL modem, upper level router or switch. A static IP address, dynamic IP address, or PPPoE can be used for internet access. If connect to a terminal device with an RJ45 port such as a computer, it work as LAN portautomatically
USB port, connecting to a 3G usb dongle or USB mass storage (of special models)
System started up and in working state
3G or 4G data indication
Built-in 3G/4G modem is powered on normally.
Built-in 3G/4G modem is receiving or sending data.
Built-in 3G modem is not started.
Wireless function is enabled.
Data is being received or sent via WLAN.
Wireless function is not enabled
An Ethernet cableis connected to the LAN port properly.
Data is being received or sent through the RJ-45 port.
WAN port is connected to ethernet equipment properly.
WAN port is receiving or sending data.
To ensure proper functioning of the router, the operating environment is recommended as follows:
a) Keep away from heat, maintain ventilation
b) Lay equipments on flat surface
c) Lay equipments in dry environment without dust
d) Dismantle power supply and all wirings in thunderstorm weather in case of lightning stroke
Note: please supply rated power for equipments. If unmatched power is supplied, router may get damaged.
² Broadband Internet service (Ethernet cable access or through xDSL/Cable Modem)
² Modulator-demodulator with RJ45 port (unnecessary forethernet cable connection)
² Each PC is equipped with network connection equipment respectively (wireless network card or wire network card and network cable)
² Windows 98, Me, NT, 2000, XP, Vista, 7 and other operating systems supporting TCP/IP protocol
² Internet Explorer 6.0 or higher version
1. Hardware connection
Please use ancillary power adapter to supply power for router, start router, and then connect your computer to the RJ45 port on the router by using aRJ45 network cable.
Prompt: you can connect wireless broadband router via wireless interface. When configuring router for the first time, we recommend you to connect with wire method. The following setting steps are all based on wire connection.
2. Set up your computer network in a correct way
The router default LAN port’s IP address as 192.168.169.1 and default subnet mask as 255.255.255.0. These values can be modified according to actual condition. The text will explain it with default value.
1) Double click “My Network Place”on desktop, and click “Viewnetwork connections” on dialog box, and select “Local Area Connection” of corresponding network card on this page.
2) Double click “Local Area Connection”, select “Internet Protocol (TCP/IP)” indialog box popped out, and then click “Properties”, as the following picture:
3) In “Internet Protocol (TCP/IP) Property” screen popped out, select “obtain an IP addresses automatically” and “obtain DNS server address automatically”, click “OK”
3. Log on router configuration page
1) Open IE browser, input at address bar: 192.168.169.1, Enter.
2) In log-in window popped out, input user name: admin; password: admin; then click "OK”.